LOW DIRECT EXIT TRAILERS

 

Standard Equipment

 

Screw diameter 400 mm (excepted on SDB20-SDB25-SDB30)	INOX screw with Inox or epoxy covered steel case
Bevel case rear exit	Hydraulic moto-reducer drive with speed variator
Revolving wheel stand	Control of hydraulic door
Adjustable height of the coupling	Revolving coupling eye
Hydraulic brake

Technical specifications

 

  

TYPES Capacity Case lenght Case width Screw diameter Height floor/top of the case Unloading height Unloaded weight Axle/gauge Tyres SDB20 20 hl 2.50 m 1.30 m 300 mm 1.40 m 0,43 m 780 kg 50 x 1150 10.0/75x15 10pl SDB25 25 hl 2.50 m 1.30 m 300 mm 1.55 m 0,43 m 800 kg 50 x 1150 10.0/75x15 10pl SDB30 30 hl 2.50 m 1.50 m 300 mm 1.63 m 0,43 m 860 kg 60 x 1200 10.0/75x15 10pl SDB35 35 hl 3.00 m 1.80 m 400 mm 1.63 m 0,51 m 1180 kg 60 x 1600 11.5/80x15 12pl SDB40 40 hl 3.00 m 1.80 m 400 mm 1.72 m 0,51 m 1200 kg 60 x 1600 11.5/80x15 12pl SDB45 45 hl 3.00 m 1.80 m 400 mm 1.82 m 0,51 m 1240 kg 70 x 1600 11.5/80x15 14pl SDB50 50 hl 3.50 m 2.00 m 400 mm 1.75 m 0,51 m 1320 kg 70 x 1600 11.5/80x15 14pl SDB55 55 hl 3.50 m 2.00 m 400 mm 1.85 m 0,54 m 1340 kg 70 x 1600 12.5/80x15 14pl SDB60 60 hl 3.50 m 2.00 m 400 mm 1.92 m 0,54 m 1400 kg 70 x 1600 12.5/80x15 14pl

Options

 

Draining caisson	Inox storage caisson only on Inox case (height floor / top of the case : +8 cm)
Electric moto-reductor with control box On / Off / Reversal	Speed variator for electric drive
Hydraulic cover with left and right opening	Protection tarpaulins with hooks and hoops
Inclined top deflectors (steel or Inox)	Road tyres